ABB DressPack IRB 6640, Product Manual

Page: 255 / 370

Note Action
xx0500001948
Back:
Hold the spiral of the motor cable up
while pulling out the process cable
package.
8
Parts:
• A: Spiral of motor cable
• B: Groove in the cable and hose guide
• C: Process cable package
Note
Do not damage the motor cable in the process!
Back:
Remove the process cable package by
pulling it out backwards.
9
Refitting - part one
The procedure below details how to refit the process cable package. The refitting
procedure is described in two parts. This is the first part.
Note Action
DANGER
Before any work inside the cabinet,
please observe the safety information
in section
DANGER - Make sure that
the main power has been switched off
in the product manual for the IRC5
controller.
1
CAUTION
The cable package is sensitive to
mechanical damage. They must be
handled with care, especially the con-
nectors, in order to avoid damaging
them.
2
Continues on next page
Product manual - DressPack/SpotPack IRB 6640 255
3HAC028638-001 Revision: K
© Copyright 2007-2018 ABB. All rights reserved.
4 Repair
4.2.8 Replacement process cable package IRBDP SW4 UI (IRB66X0ID)
Continued