ABB DressPack IRB 6640, Product Manual

Page: 154 / 370

Note Action
When securing cables and hoses with
cable ties:
never overtighten the ties! This
may damage the equipment.
Note
Use wide cable ties!
Loop the excess hoses and cables in a way
that enables securing them with
cable
clamps or similar allowing quick replace-
ment of the package.
2
After changing the DressPack installation,
it needs to be inspected to ensure the
function. 3
Process cable package too short
If the DressPack is too short, unacceptable strain may be put on the cables, hoses
and connectors.
Note Action
Check the Adjustments of - IRBDP MH2
UE and IRBDP SW2 UE on page 151 sec-
tion for article numbers!
Make sure the correct cable package is
used. 1
Check that the position of the ball joint
housing is correct. 2
Detailed in section Fitting the cable
packages IRBDP MH2 UE and IRBDP
SW2 UE on page 102
.
Make sure all attachments and supports
are
fitted correctly .
3
If required adjust their fitting positions!
When securing cables and hoses with
cable ties:
never overtighten the ties! This
may damage the equipment.
How to adjust the tension arm is detailed
in section
Adjusting tension arm unit on
page 299 .
Note
If the DressPack cable package appears to
be fitted too strained, the reason can be
that the tension arm is adjusted too tightly.
4
Detailed in section Preventive inspection,
DressPack upper arm on page 200 .
After changing the DressPack upper arm
installation, it needs to be inspected to en-
sure the function. 5
154 Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K
© Copyright 2007-2018 ABB. All rights reserved.
2 Installation
2.3.1 Adjustments of - IRBDP MH2 UE and IRBDP SW2 UE
Continued