ABB DressPack IRB 6640 Product Manual Download Page 178

Page: 178 / 370

Note

Action

xx0700000319

Remove the attachment screws securing the

top cover

at the base of the robot.

Keep the screws! They will be reused when fit-
ting the water and air unit.

Parts:

•

A: Top cover

Reuse the screws of the top cover.

Fit the Water and Air unit and secure it with its
attachment screws, M6x8 quality 8.8-A2F (4
pcs).

Shown in the figure in section

Location

of Water and air unit, type S on
page 175

Tightening torque, brass couplings
1/2": 31 Nm

Connect the water and air supplies.

CAUTION

Do not tighten the brass couplings for water
and air with excessive force.

Tightening torque, brass couplings
3/8": 17 Nm
Specified in section

Connections to

Water and Air unit, type S on page 181

below.

xx0600003347

Connect the split box cable for Water and Air
unit with the split box at the Water and Air unit.

Parts:

•

Split box

Installation of Water and air unit, type Sb

The procedure below details how to install the Water and Air unit, type Sb on the
robot base.

Note

Action

DANGER

Turn off all:

•

electric power supply

•

hydraulic pressure supply

•

air pressure supply

to the robot, before entering the robot working
area.

Continues on next page

178

Product manual - DressPack/SpotPack IRB 6640

3HAC028638-001 Revision: K

2 Installation

2.6.1 Installation of Water and air unit

Continued

Summary of Contents for DressPack IRB 6640

















































































































































































































































































































































































Search results

Summary of Contents for DressPack IRB 6640

Reviews:

Brands by name

Popular brands

ABB DressPack IRB 6640, Product Manual

Search results

Summary of Contents for DressPack IRB 6640

Reviews:

Brands by name

Popular brands