ABB DressPack IRB 6640, Product Manual

Page: 132 / 370

Note Action
Tightening torque, brass couplings 1/2":
31Nm Fit the process cable package to the water
and air unit .
CAUTION
Do not tighten the brass couplings for water
and air with excessive force.
9
Tightening torque, brass couplings 3/8":
17Nm
xx0800000083
Parts:
• A: Water and air unit
Shown in the figure Location of the cable
package on page 128 .
Fit the process cable package to the lower
bracket with the spiral hose clamp .
10
Shown in the figure Location of the cable
package on page 128 .
Secure the process cable package to the
side bracket balancing cylinder with the
velcro straps .
11
Shown in the figure Location of the cable
package on page 128 .
Fit the process cable package to the grip-
ping clamp on the lower arm plate .
12
Shown in the figure Location of the cable
package on page 128 .
Secure the process cable package with the
velcro strap to the lower arm plate.
13
Shown in the figure Location of the cable
package on page 128 .
Fit the process cable package to the grip-
ping clamp on the adjustable bracket .
14
Shown in the figure Location of the cable
package on page 128 .
Fit the process cable package in the ball
joint housing on the adjustable bracket .
15
Shown in the figure Location of the cable
package on page 128 .
Fit the process cable package on the ball
joint housing on the process cable support
axis 6 .
16
132 Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K
© Copyright 2007-2018 ABB. All rights reserved.
2 Installation
2.2.13 Fitting the cable package IRBDP SW5 CE (SpotPack Basic)
Continued