ABB DressPack IRB 6640, Product Manual

Page: 122 / 370

Note Action
Tightening torque, brass couplings 1/2":
31Nm Connect all cable and hose connectors to
the customer plate, previously fitted to the
connection plate, base.
CAUTION
Do not tighten the brass couplings for water
and air with excessive force.
9
Tightening torque, brass couplings 3/8":
17Nm
Recheck all cables and hoses for straining
or twisting.
Reroute if necessary!
Screw dimension: M6x20
xx0700000388
Secure the cable package with the velcro
straps and straps on the balancing device.
Also fit the rubber clamp with bracket on
the cable package to the lower bracket. 10
Parts:
• A: Straps
• B: Velcro straps
• C: Rubber clamp with bracket
• D: Side bracket, balancing device
• E: Lower bracket
Push the cable package through the inside
of the lower arm. 11
Fit the rubber clamp with bracket on the
inside of the lower arm. 12
Attach the rubber clamp with bracket on
top of the upper arm. 13
Fit the connection plate to the mounting
plate axis-3. 14
122 Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K
© Copyright 2007-2018 ABB. All rights reserved.
2 Installation
2.2.11 Fitting the cable package IRBDP MH1 LI
Continued