manualshive.com logo in svg

Siemens SIMOTICS S-1FK2, Руководство по эксплуатации

Поделиться
Скачать
Siemens SIMOTICS S-1FK2 Скачать руководство пользователя страница 543

Cause:

The forced checking procedure (test stop) for the safe motion monitoring functions is currently in progress.

Remedy:

Not necessary.
The message is automatically withdrawn when the test stop has been completed.
Note:
SI: Safety Integrated

C30799

SI Motion P2: Acceptance test mode active

Message value:

-

Drive object:

All objects

Reaction:

NONE

Acknowledge:

IMMEDIATELY (POWER ON)

Cause:

The acceptance test mode is active.
This means the following:
- the setpoint velocity limiting is deactivated (r9733).

Remedy:

Not necessary.
The message is automatically withdrawn when exiting the acceptance test mode.
Note:
SI: Safety Integrated

N30800 (F)

Power unit: Group signal

Message value:

-

Drive object:

All objects

Reaction:

OFF2

Acknowledge:

NONE

Cause:

The power unit has detected at least one fault.

Remedy:

Evaluate the other messages that are presently available.

Reaction upon F: OFF2
Acknowl. upon F: IMMEDIATELY

F30801

Power unit DRIVE-CLiQ: Sign-of-life missing

Message value:

Component number: %1, fault cause: %2

Drive object:

All objects

Reaction:

OFF2

Acknowledge:

IMMEDIATELY

Cause:

A DRIVE-CLiQ communication error has occurred from the Control Unit to the power unit concerned.
The computing time load might be too high.
Fault cause:
10 (= 0A hex):
The sign-of-life bit in the receive telegram is not set.
Note regarding the message value:
The individual information is coded as follows in the message value (r0949/r2124):
0000yyxx hex: yy = component number, xx = error cause

Remedy:

- deselect functions that are not required.
- if required, increase the sampling times (p0112, p0115).
- replace the component involved (power unit, Control Unit).

F30802

Power unit: Time slice overflow

Message value:

%1

Drive object:

All objects

Faults and alarms

13.2 List of faults and alarms

SINAMICS S210 servo drive system

Operating Instructions, 12/2017, A5E41702836B AA

541

Содержание SIMOTICS S-1FK2

































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды