manualshive.com logo in svg

Siemens SIMOTICS S-1FK2, Руководство по эксплуатации

Поделиться
Скачать
Siemens SIMOTICS S-1FK2 Скачать руководство пользователя страница 372

Reaction:

OFF2

Acknowledge:

IMMEDIATELY (POWER ON)

Cause:

The safety-relevant basic function "SOS/SLS" is not enabled in p9501 although other safety-relevant monitoring functions 

are enabled.
Note:
This fault does not result in a safety stop response.

Remedy:

Enable the function "SOS/SLS" (p9501.0) and carry out a POWER ON.
Note:
SI: Safety Integrated
SLS: Safely Limited Speed
SOS: Safe Operating Stop
See also: p9501

F01684

SI Motion P1 (CU): Safely limited position limit values interchanged

Message value:

%1

Drive object:

All objects

Reaction:

OFF2

Acknowledge:

IMMEDIATELY (POWER ON)

Cause:

For the function "Safely Limited Position" (SLP), a lower value is in p9534 than in p9535.
Note:
This fault does not result in a safety stop response.
Fault value (r0949, interpret decimal):
1: Limit values SLP1 interchanged.
2: Limit values SLP2 interchanged.

Remedy:

- correct the lower and upper limit values (p9535, p9534).
- carry out a POWER ON (switch-off/switch-on).
Note:
SI: Safety Integrated
SLP: Safely Limited Position / SE: Safe software limit switches

F01685

SI Motion P1 (CU): Safely limited speed limit value too high

Message value:

%1

Drive object:

All objects

Reaction:

OFF2

Acknowledge:

IMMEDIATELY (POWER ON)

Cause:

The limit value for the function "Safely Limited Speed" (SLS) is greater than the speed that corresponds to an encoder 

limit frequency of 500 kHz.
Note:
This fault does not result in a safety stop response.
Fault value (r0949, interpret decimal):
Maximum permissible speed.

Remedy:

Correct the limit values for SLS and carry out a POWER ON.
Note:
SI: Safety Integrated
SLS: Safely Limited Speed
See also: p9531

F01686

SI Motion: Illegal parameterization cam position

Message value:

%1

Drive object:

All objects

Faults and alarms
13.2 List of faults and alarms

SINAMICS S210 servo drive system

370

Operating Instructions, 12/2017, A5E41702836B AA

Содержание SIMOTICS S-1FK2

































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды