manualshive.com logo in svg

Siemens SIMOTICS S-1FK2, Руководство по эксплуатации

Поделиться
Скачать
Siemens SIMOTICS S-1FK2 Скачать руководство пользователя страница 464

A07805 (N)

Drive: Power unit overload I2t

Message value:

-

Drive object:

All objects

Reaction:

NONE

Acknowledge:

NONE

Cause:

The alarm threshold for I2t overload (p0294) of the power unit has been exceeded.
The response parameterized in p0290 becomes active.

Remedy:

- reduce the continuous load.
- adapt the load duty cycle.
- check the assignment of the rated currents of the motor and Motor Module.

Reaction upon N: NONE
Acknowl. upon N: NONE

F07808 (A)

HF Damping Module: damping not ready

Message value:

New message: %1

Drive object:

All objects

Reaction:

OFF2 (NONE, OFF1, OFF3)

Acknowledge:

IMMEDIATELY

Cause:

When switching on or in the switched-on state, the HF Damping Module does not return a ready signal.

Remedy:

- check the DRIVE-CLiQ wiring to the HF Damping Module.
- check the 24 V supply voltage.
- if required, replace the HF Damping Module.
Note:
HF Damping Module

Reaction upon A: NONE
Acknowl. upon A: NONE

F07810

Drive: Power unit EEPROM without rated data

Message value:

-

Drive object:

All objects

Reaction:

NONE

Acknowledge:

IMMEDIATELY

Cause:

No rated data are stored in the power unit EEPROM.

Remedy:

Replace the power unit or inform Siemens Customer Service.

F07815

Drive: Power unit has been changed

Message value:

Parameter: %1

Drive object:

All objects

Reaction:

NONE

Acknowledge:

IMMEDIATELY

Cause:

The code number of the actual power unit does not match the saved number. This only occurs if the comparator in p9906 

or p9908 is not at 2 (low) or 3 (minimum).
Fault value (r0949, interpret decimal):
Number of the incorrect parameter.

Faults and alarms
13.2 List of faults and alarms

SINAMICS S210 servo drive system

462

Operating Instructions, 12/2017, A5E41702836B AA

Содержание SIMOTICS S-1FK2

































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды