manualshive.com logo in svg

Siemens SIMOTICS S-1FK2, Руководство по эксплуатации

Поделиться
Скачать
Siemens SIMOTICS S-1FK2 Скачать руководство пользователя страница 419

Remedy:

- switch-off/switch-on the power supply for the Control Unit.
- check the DRIVE-CLiQ connection.
- if required, replace the Terminal Module.
The Terminal Module should be directly connected to a DRIVE-CLiQ socket of the Control Unit.
If the fault occurs again, replace the Terminal Module.

Reaction upon A: NONE
Acknowl. upon A: NONE

A03501

TM: Sampling time change

Message value:

-

Drive object:

All objects

Reaction:

NONE

Acknowledge:

NONE

Cause:

The sampling times of the inputs/outputs were changed.
This change only becomes valid after the next boot.

Remedy:

Carry out a POWER ON.

F03505 (N, A) Analog input wire breakage

Message value:

%1

Drive object:

All objects

Reaction:

OFF1 (NONE, OFF2)

Acknowledge:

IMMEDIATELY (POWER ON)

Cause:

The wire-break monitoring for an analog input has responded.

Remedy:

Check the wiring for interruptions.

Reaction upon N: NONE
Acknowl. upon N: NONE
Reaction upon A: NONE
Acknowl. upon A: NONE

A03506 (F, N) 24 V power supply missing

Message value:

%1

Drive object:

All objects

Reaction:

NONE

Acknowledge:

NONE

Cause:

The 24 V power supply for the digital outputs (X124) is missing.

Remedy:

Check the terminals for the power supply voltage (X124, L1+, M).

Reaction upon F: NONE
Acknowl. upon F: IMMEDIATELY (POWER ON)
Reaction upon N: NONE
Acknowl. upon N: NONE

A03507 (F, N) Digital output not set

Message value:

%1

Drive object:

All objects

Reaction:

NONE

Acknowledge:

NONE

Faults and alarms

13.2 List of faults and alarms

SINAMICS S210 servo drive system

Operating Instructions, 12/2017, A5E41702836B AA

417

Содержание SIMOTICS S-1FK2

































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды