Siemens SIMOTICS S-1FK2 Скачать руководство пользователя страница 481

Страница: 481 / 768

Reaction:

NONE

Acknowledge:

NONE

Cause:

The rotating measurement is activated. For the rotating measurement, the motor can accelerate up to the maximum speed

and with maximum torque. Only the parameterized current limit (p0640) and the maximum speed (p1082) are effective.

The behavior of the motor can be influenced using the direction inhibit (p1959.14, p1959.15) and the ramp-up/ramp-down

time (p1958).
The rotating measurement is carried out at the next switch-on command.

Remedy:

Not necessary.
The alarm is automatically withdrawn after the rotating measurement has been successfully completed or for the setting

p1960 = 0.
Note:
If a POWER ON or a warm restart is performed with motor data identification selected, the motor data identification request

will be lost. If motor data identification is required, it will need to be selected again manually following ramp-up.

F07990

Drive: Incorrect motor data identification

Message value:

Drive object:

All objects

Reaction:

OFF2 (NONE, OFF1)

Acknowledge:

IMMEDIATELY

Faults and alarms

13.2 List of faults and alarms

SINAMICS S210 servo drive system

Operating Instructions, 12/2017, A5E41702836B AA

479

Содержание SIMOTICS S-1FK2

































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SIMOTICS S-1FK2

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIMOTICS S-1FK2, Руководство по эксплуатации

Результаты поиска

Содержание SIMOTICS S-1FK2

Отзывы:

Бренды по названию

Популярные бренды