manualshive.com logo in svg

Siemens SIMOTICS S-1FK2, Руководство по эксплуатации

Поделиться
Скачать
Siemens SIMOTICS S-1FK2 Скачать руководство пользователя страница 417

Remedy:

- carry out a warm restart (p0009 = 30, p0976 = 2, 3).
- carry out a POWER ON (switch-off/switch-on) for all components.
- upgrade firmware to later version.
- contact Technical Support.
For alarm value = 10 hex (16 dec):
Load a compatible DCB user library (compatible to the interface of the DCC standard library).
For alarm value = 12 hex (18 dec):
Carry out a POWER ON (switch-off/switch-on) for all components.
Note:
DCB: Drive Control Block
DCC: Drive Control Chart
TEC: Technology Extension

F02151 (A)

TEC: internal software error

Message value:

%1

Drive object:

All objects

Reaction:

Servo: OFF2 (NONE, OFF1, OFF3)

Acknowledge:

IMMEDIATELY (POWER ON)

Cause:

An internal software error has occurred within a Technology Extension.
Fault value (r0949, interpret hexadecimal):
Only for internal Siemens troubleshooting.

Remedy:

- carry out a POWER ON (switch-off/switch-on) for all components.
- upgrade firmware to later version.
- contact Technical Support.
- replace the Control Unit.
Note:
TEC: Technology Extension

Reaction upon A: NONE
Acknowl. upon A: NONE

F02152 (A)

TEC: insufficient memory

Message value:

%1

Drive object:

All objects

Reaction:

OFF1

Acknowledge:

IMMEDIATELY (POWER ON)

Cause:

Too many functions have been configured on this Control Unit (e.g. too many drives, function modules, data sets, 

Technology Extensions, blocks, etc).
Fault value (r0949, interpret decimal):
Only for internal Siemens troubleshooting.

Remedy:

- change the configuration on this Control Unit (e.g. fewer drives, function modules, data sets, Technology Extensions, 

blocks, etc).
- use an additional Control Unit.
Note:
TEC: Technology Extension

Reaction upon A: NONE
Acknowl. upon A: NONE

F02153

TEC: technology function does not exist

Message value:

-

Drive object:

All objects

Faults and alarms

13.2 List of faults and alarms

SINAMICS S210 servo drive system

Operating Instructions, 12/2017, A5E41702836B AA

415

Содержание SIMOTICS S-1FK2

































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды