Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 291 / 332

Synergy Series Operation Guide (v18) Custom Controls • 9–11
Programming Special Functions
The following sections describe how to program your custom controls with various other special
functions. Refer to the section “
Editing Custom Control Macros ” on page 9–20 for more
information on inserting events into existing custom control macros.
The following functions are covered in this section:
• Go To Menu
• Custom Control Holds
• Custom Control Pauses
Go To Menu
Use the Go To Menu feature to create custom controls that automatically display S&T 3D menus.
Use the following procedure to create an S&T 3D Go To Menu custom control macro:
1. Navigate to the Custom Controls Menu as follows:
• Press
HOME B Custom Controls
.
Custom Controls Menu
2. Select the custom control button you want to record to as follows:
• Use the
Bank
knob to select the custom control bank you want to record the custom
control to.
• Use the
Button
knob to select the custom control button that you want to record a
custom control macro to. You can also press the desired button directly on the
control panel. Remember that buttons marked with an asterisk (*) in the list have
already been programmed.
3. Navigate to the Special Menu as follows:
• Press Start Recording
B
Insert Special
B
Special .
Operating
Tip
As a recommendation, keep special functions grouped together on
your
physical custom control buttons.