Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 300 / 332

9–20 • Custom Controls Synergy Series Operation Guide (v18)
Editing Custom Control Macros
After your custom control buttons have been programmed, you may wish to review and edit the
contents. Events can easily be inserted or deleted through the
Custom Controls Menu :
• The Main Area of the Custom Controls Menu displays the location of the custom
control that you are editing, for example, Bank 1 Button 1 [Custom01] , and the
contents of the custom control, including the number of events, the duration of the
macro, and details of the event highlighted in the scroll area.
• The Scroll Area of the Custom Controls Menu provides a list of the events currently
programmed into the custom control button.
• The Label Area of the Custom Controls Menu provides softkeys for inserting,
deleting, and running the events, as required.
Editing Custom Control Macros
Use the following procedure to edit a custom control button:
1. Navigate to the Custom Controls Menu as follows:
• Press
HOME B Custom Controls
.
Custom Controls Menu
2. Select the Custom Control bank and button that you want to edit as follows:
• Use the Bank knob to select the custom control bank that you want to edit the
custom control on.
• Use the
Button
knob to select the custom control that you wish to edit.
3. Press Edit to display the Edit Custom Control Menu .
Note
If the custom control has been programmed to recall a memory, as in
the example above, the memory name is displayed in the main area. If
memories from more than one MLE are being recalled, the name from
the highest MLE is displayed.
Note Buttons with an asterisk (*) or an “at symbol” ( @ ) next to them in the
list are already programmed and can be edited.
Note If you are editing a relative custom control, <relative> will appear
next to the Bank and Button identification and the relative MLE level
(
R LVL ) will be displayed instead of the MLE number.