manualshive.com logo in svg

Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 63 / 332

Поделиться
Скачать
Ross SYNERGY 4000DR-003 Скачать руководство пользователя страница 63

Synergy Series Operation Guide (v18)

Control Panel Introduction • 2–21

Switcher Timeout

If no control panel buttons are touched and no fader arms are moved for a period of 30 minutes, the 
switcher goes into a “sleep” mode and all lights are automatically turned off. This function is 
specifically designed to extend the life of the display and the button lamps.

If this timeout occurs, press any button or move any fader (or joystick) to “wake” the switcher and 
turn on all lights. 

Note

The switcher does 

not 

act on a button push when it is coming out of 

“sleep” mode.

The factory default timeout interval is 30 minutes.

Содержание SYNERGY 4000DR-003













































































































































































































































































































































Отзывы:

Нет отзывов