Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 301 / 332

Synergy Series Operation Guide (v18) Custom Controls • 9–21
Edit Custom Control Menu
4. Select between the following editing functions:
•
Go To Start
— Select this function to go to the start of the macro.
•
Insert Events
— Select this function to insert an event before the currently
highlighted event. Refer to the section “ Inserting Events ” on page 9–23 for more
information on inserting an event.
•
Delete Event
— Select this function to delete the currently highlighted event. This
cannot be undone. Refer to the section “ Deleting Custom Controls ” on page 9–26
for more information on deleting an event.
• Modify Event — Select this function to modify the currently highlighted event.
The Modify Event function will take you to the Special Menu that was used to
create the event. Refer to the section below for more information on modifying
events.
•
Run Single Event
— Select this function to run the currently highlighted event.
Only the selected custom control event will be played.
• Run From Here — Select this function to run the custom control, starting from
the currently highlighted position.
This completes the procedure for editing a custom control. Refer to the section “ Inserting Events ” on
page 9–23 for more information on inserting an event into a custom control.
Modifying Events
The Modify Event function allows you to modify certain events in an already existing custom control.
Only events such as Pause CC can be modified.
Use the following procedure to modify an event in a custom control:
1. Navigate to the Custom Controls Menu as follows:
• Press HOME B Custom Controls .
Note If your macro includes pauses or holds, a timeline will be displayed
showing these events.
Note Only certain functions found on the Special Menu , such as Pause
CC , can be modified.