Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 121 / 332

Synergy Series Operation Guide (v18) Switcher Basics • 4–43
Time Clock Main Menu
2. For each of the counting modes, the following softkeys apply:
• Press
Start
to start the clock counting up from zero, or, down from the preset time.
When
Start
is pressed, the softkey label changes to
Stop
.
• Press
Stop
to stop the clock at its current count.
• Press Reset Time to reset the clock to zero (for count-up mode), or to the preset
time (for count-down mode).
3. To set a time for the clock to begin counting down from:
• Access the Time Clock Main Menu as previously described.
• Press
Reset Time
to display the Time Clock Menu — Reset Time Menu .
Time Clock Menu – Reset Time
• Use the
Hours
knob to preset the hours that the clock will Reset to and start
counting from.
• Use the
Minutes
knob to preset the minutes that the clock will Reset to and start
counting from.
• Use the
Seconds
knob to preset the seconds that the clock will Reset to and start
counting from.
4. To modify the direction that the Time Clock will start counting from:
• Access the Time Clock Main Menu as previously described.
• Press
Direction
to display the
Going
options on the menu.
Important
The Time Clock — Reset Time Menu is only accessible (not grayed
out) when the Direction is set to Down or Down > Up .
Note If the hours are preset to a value greater than 23, the overlay display on
the preview monitor will read in days, hours, minutes and seconds, for
example, 6:23:59:59, up to a limit of 7 days.