Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 155 / 332

Synergy Series Operation Guide (v18) Pattern Control • 6–5
Please note:
• When the DVE Send and Remote Control Option is installed and the
DVE
button
is pressed, the Pattern Selection Section changes into a DVE shot box . Refer to
Chapter 9, “ DVE Send ” for full details on the DVE Send feature.
• When the Squeeze & Tease Option is installed and the
DVE SEND
and
WIPE
buttons are pressed simultaneously (in the Transition Group ), the Pattern
Selection Section changes into a Squeeze & Tease shot box . Refer to Chapter 7,
“ Flying Keys ” for full details on the Squeeze & Tease Wipe feature.
3. Pattern Direction Section
For all switchers, the Pattern Direction Section buttons control the direction and
modification of the selected wipe. With the DVE Send and Remote Control Option
installed, the
NORM
,
REV
and
FLIP FLOP
buttons control the direction of the DVE
effect. Note that
NORM
,
REV
and
FLIP FLOP
are mutually exclusive.
• Press
NORM
to set the wipe direction to normal. The new picture is revealed from
the black area (as shown on the pattern button) to the white area.
~
When
DVE SEND
is pressed in an MLE, press
NORM
to run the DVE effect
forward. The video on the Program bus will transition off with the effect,
revealing the Preset bus.
• Press
REV
to set the direction of the wipe to reverse. The new picture is revealed
from the white area to the black area. When
DVE SEND
is pressed in an MLE,
press
REV
to run the DVE effect in reverse. The video on Preset will transition on
with a DVE effect, covering up the Program bus.
• Press
FLIP FLOP
to set the wipe direction to “flip flop” (also known as
Normal/Reverse ). Wipe direction is normal for the first transition, reverse for the
second, then normal for the third, etc. When
DVE SEND
is pressed, then press
FLIP FLOP
to run the DVE effect forward with the first transition, then reverse
with the next transition. See Chapter 9 for DVE Send details.
• The
HMULT
button allows you to horizontally multiply the number of wipe
patterns that are visible on screen.
~
Press the button repeatedly to cycle through several different levels of
horizontal multiplication. The button lights when horizontal multiplication is
active.
~ Press and hold the button for 1 second to clear all horizontal and vertical
multiplication.
• The
VMULT
button allows you to vertically multiply the number of wipe patterns
that are visible on screen.
~
Press the button repeatedly to cycle through several different levels of vertical
multiplication. The button lights when vertical multiplication is active.
~ Press and hold the button for 1 second to clear all horizontal and vertical
multiplication.
Note
Vertical multiplication is not available for matrix wipe patterns.
NORM
REV
FLIP
FLOP
HMULT
VMULT