Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 77 / 332

Synergy Series Operation Guide (v18) Using the Menu System • 3–13
Option Boards Menu
The Option Boards Menu allows you to view the option boards that are currently installed on the
frame. The Main Area of the menu provides three columns of information that pertain to the optional
boards that can be installed in the frame:
• Board — This column lists each circuit board by part number and name.
• Rev — This column lists the hardware revision number of the board.
• FPGA Rev — This column lists the software revision number of the board.
Use the following procedure to verify the option boards that are installed on the Synergy frame:
1. Navigate to the Installed Options Menus as follows:
• Press
HOME B MORE B Setup B Installed Options
.
2. Press
Option Boards
to display the Option Boards Menu .
Options Boards Menu
3. Use the middle knob to scroll through the list of installed option boards.
The status for each MLE reflects whether or not any of the available MLE options are
installed:
• Squeeze & Tease 2D;
• Squeeze & Tease 3D;
• Dual Aspectizer;
• Ultimatte Insider; and
• Dual Border Generator.
The status for each input slot reflects whether or not the optional Input Carrier Board
is installed. Each Input Carrier Board has sockets provided for up to four hardware
options.
This completes the procedure to verify the option boards that are installed on the Synergy frame.
Note
The menu is provided for information only — no action can be taken.