Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 256 / 332

8–14 • Memory Functions and More Synergy Series Operation Guide (v18)
~ Press and hold
BANK
, then press the number of the desired bank (from
0
to
9
).
Once you select the bank, the number is shown on the display (in the 10’s digit
column).
• Select the register within the bank (the 1’s digit) by pressing the number (from
0
to
9
). The number is shown on the display and the effect is recalled. You do not need
to press
ENTER
.
Refer to the section “ Recall Register Notes ” on page 8–15 for important information regarding the
recall procedure itself, and the use of
UNDO
.
Recalling Registers using the MLE Memory Group
For Synergy 3 and 4 switchers, use the following procedure to recall switcher memory registers using
any
MLE Memory group. This function is the same as pressing an individual MLE button in the
Global Memory System group’s Recall Section .
1. In any MLE’s Memory group, press
RECALL
.
2. ( Optional ) Using the buttons in the Include group, select the type of data that you with
to include in the recall function. These buttons “arm” the recall function, and can be
enabled in any combination:
• When lit,
ATTRIB
indicates that the Auto Recall option in the Personality Menu
is enabled, and the switcher will recall the Key Only and Effects Dissolve settings
as part of a memory recall operation.
• Enable
INCL DVE
(in the Global Memory System group) to recall the DVE effect
number (if any) that was stored in the selected memory register. If you also want to
recall the DVE’s associated Aux Bus crosspoints, ensure that a primary DVE is
interfaced with the switcher.
• Enable
KEYS ONLY
(in the MLE Memory group) to recall all memory register
information except for BKGD/PST crosspoints. The function applies to the
associated MLE only.
• Enable
VTR CLIP
(in the Global Memory System group) to recall VTR, Video
Server or Audio Server clip data from a selected memory register. Registers include
a physical serial controlled device (such as a VTR, Video Server or Audio Server)
and a timecode. If the device is a server, additional information such as an ID is also
stored.
The
VTR Remote Control , Video Server Control or Audio Server Control
option must be installed. Any combination of options can be installed.
• Enable EFF DISS (in the MLE Memory group) to recall all non-dissolving values
first, and then slew any stored analog functions from their current settings to the
recalled settings. The effects dissolve function applies to the associated MLE only.
3. On the keypad (in the MLE Memory group), enter the desired register:
• If required, select the bank. Two methods are available:
~
Press
BANK
repeatedly, to advance by one bank per press .
~ Press and hold
BANK
, then press the number of the desired bank (from
0
to
9
).
Note Key Only and Effects Dissolve settings are only recalled if the Auto
Recall option is enabled.