Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 122 / 332

4–44 • Switcher Basics Synergy Series Operation Guide (v18)
Time Clock Direction Menu
• Use the
Going
knob to select
Up
to set the time clock for counting up from zero to
the preset reset time.
• Use the
Going
knob to
Down
to set the time clock for counting down from the
preset reset time.
• Turn the
Going
knob to
Down->Up
to set the time clock for counting down from
the preset reset time to zero and then counting up until you press the
Stop
or
Reset
Time
button. In this mode, the counter is blue as it counts down and then changes to
red as it counts up.
5. To modify the MLE or FTB that the clock will start with :
• Access the Time Clock Main Menu as previously described.
• Press
Transition
to display the Preview Transition Menu 1-2 .
Preview Transition Menu 1-2
• With the
Master
softkey set to
Off
, the clock is started only when
Start
is pressed.
• When
Master
is set to
On
, the Preview Transition Menu 2-2 is displayed with
additional
MLE
and
FTB
softkeys.
Preview Transition Menu 2-2
Preview Transition Menu 2-2 allows you to start the count-up, count-down, or
count-down-then-up clock based on a switcher transition or a cut from source to source
on one (or more) MLEs. When any of the MLEs (or FTB) are toggled On , any transition
or cut performed in that location automatically resets and starts the clock.