Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 252 / 332

8–10 • Memory Functions and More Synergy Series Operation Guide (v18)
3. On the keypad, enter the desired storage register. If required, select a memory register
bank (the 10’s digit). Two methods are available:
• Press
BANK
repeatedly, to advance by one bank per press .
OR
• Press and hold
BANK
, then press the desired bank (
0
to
9
).
Once you select the bank, the number is displayed (in the 10’s digit column) and the
ENTER
button lights.
• Select the register within the bank (the 1’s digit), by pressing the number (from
0
to
9
).
4. Press
ENTER
to complete the procedure. The register is now stored in memory and the
ENTER
button light turns off.
This completes the procedure to store switcher memory registers using the Global Memory System
Group .
Notes on Storing Memory Registers
Please note the following important points regarding memory register storage:
• If you wish to cancel the entire storage procedure at any point, simply turn off the lit
buttons in the
Store Section by pressing a button in the Recall column, or any of the
buttons used for changing transition rates.
• If you have enabled the Next Available Memory option in the Personality Menu :
~ you can store a new memory to the next available register. The Synergy switcher
will display the next unnamed available memory register in the
Global Memory
System Group .
~ a pop up message is displayed if there are no available registers in the selected
memory bank.
• Storing a setup in a specific register overwrites any previous information that may have
been contained in that register. There is no “undo” function with regard to storage.
• Refer to the section “ Storing Registers with DVE Crosspoints ” on page 8–12 for
important information regarding DVEs and Aux Bus assignments.
Storing Registers using the MLE Memory Group
For Synergy 3 and 4 switchers, use the following procedure to store switcher memory registers using
any
MLE Memory Group . This function is the same as pressing an individual MLE button in the
Store Section of the Global Memory System Group .
Operating
Tip
The next available unnamed memory register is now displayed in the
Global Memory System Group if you have enabled the Next
Available Memory option. You can save to this register or select
another.
Note If the desired bank is already selected, you need only select the register
(from 0 to 9 ).