Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 156 / 332

6–6 • Pattern Control Synergy Series Operation Guide (v18)
• The
SET USER
button calls up the User Wipe Menu , which is used to select user
wipes and assign them to one of the eight (seven on the Synergy 2) available “user”
wipe buttons in the
Pattern Selection Section . Refer to the section “ User Wipes ”
on page 6–11 for complete instructions.
4. Pattern Adjustment Section
For all switchers, the Pattern Adjustment Section provides two buttons and four
“end-stop” knobs that modify the selected pattern.
• The
ASPECT
button enables the use of the
ASPECT
knob.
~ When the button is on, “closed” patterns with both horizontal and vertical
edges can have their aspect ratios adjusted. Circles can be adjusted into ovals,
squares into rectangles, etc.
~ When the button is off, all aspect ratio adjustment is removed and the pattern
returns to its default shape.
• When the
ASPECT
button is lit, the
ASPECT
knob can be used to adjust the
aspect ratio of selected patterns.
~
Turning the knob clockwise increases the pattern’s vertical aspect ratio.
~ Turning the knob counter-clockwise increases the pattern’s horizontal aspect
ratio.
• The
BORDER
knob allows you to adjust pattern borders from no border to
full-screen borders.
~
Turning the knob clockwise increases border width.
~ Turning the knob counter-clockwise decreases the pattern’s border.
• The
SOFT
knob allows you to adjust pattern edge softness from hard-edge to full
soft-edge.
~
Turning the knob clockwise increases edge softness.
~ Turning the knob counter-clockwise decreases the pattern’s edge softness.
~ When controlling preset patterns, the knob performs the same function as the
GAIN
knob (in the Effects Control group) — that is, softening the key edge
and adjusting how the pattern blends into the background. The control is
duplicated here for operator convenience.
• The
ROT
button enables the use of the
ROTATION
knob.
~ When the button is on, wipe patterns 00 and 07 (horizontal wipes) plus 10 and
17 (vertical wipes) can be rotated a full 360 degrees. Only these four patterns
can be rotated.
~ When the button is off, all rotation is removed and the pattern returns to its
default position.
Note Any adjustment of the ASPECT knob for a pattern, whether that
pattern can have the aspect adjusted or not, will change the aspect
setting for all patterns, whether the
ASPECT button is On or not.
SET
USER
ASPECT
ASPECT
BORDER
SOFT
ROT