Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 274 / 332

8–32 • Memory Functions and More Synergy Series Operation Guide (v18)
3. Insert a storage device into the Synergy Switcher as follows:
• Insert the floppy disk that contains memory registers into the floppy disk drive of
the Synergy Switcher.
OR
• Insert the USB key that contains memory registers into the USB Port of the Synergy
Switcher. You must wait 5 seconds after inserting the USB key into the USB port
before you can recall registers from it.
4. Press
Recall
to display the Disk Recall Menu 1-2 .
Disk Recall Menu 1-2
If a File Icon is displayed above a softkey label (such as Memories ), the storage device
contains a file of that type.
5. If required, press
MORE
to display the Disk Recall Menu 2-2 to view more file types.
6. Select the category of registers that you want to recall:
• Press
All
to recall all categories of registers.
• Press
Memories
to recall only Memory Registers .
• Press
Custom Controls
to recall only Custom Control Registers .
• Press
Personality
to recall only Personality Registers .
• Press
VTR Clips
to recall only VTR Clip Registers .
• Press
Installation
to recall only Installation Registers .
• Press
3D Sequences
to recall only 3D Sequence Registers .
7. Eject the storage device from the switcher.
This concludes the procedure to recall Memory Registers from a storage device.
Caution Do NOT remove the floppy disk or USB key from the switcher before
the LED on the disk drive or USB port goes out. Doing so may destroy
the data on your floppy disk or USB key, as well as the data on the next
one you insert into the switcher.