Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 165 / 332

Synergy Series Operation Guide (v18) Pattern Control • 6–15
Squeeze & Tease 2D Wipes — Normal
The table below lists the Squeeze & Tease 2D wipe names that appear in the panel menu when any
wipe button is pressed, and with the
REV
button pressed.
Squeeze & Tease 2D Wipes — Reversed
Select your foreground and background sources in the normal way, and experiment to discover the
patterns that you like the best. Both manual and auto-transitions function just like a standard wipe.
Please note:
• The Squeeze & Tease 2D or 3D WARP Option is required on all MLEs on which you
want to perform the Squeeze & Tease wipe (or 3D sequence) function.
• In the Pattern Control section, the S&T WIPES key cap must be installed. If you do
not have this key cap, please contact Technical Support .
• When enabled, the mode selects a free channel, or two free channels as required. If
channels are not available, you cannot select a S/T wipe.
• You can perform a Squeeze & Tease wipe individually on BKGD , KEY 1 or KEY 2 , but
no combination of the transition selections are allowed.
• BKGD and KEY transitions only require one Squeeze & Tease channel to perform a
Squeeze & Tease wipe. Wipes involving Auto Select keys require two channels.
• Color backgrounds cannot be used with Squeeze & Tease background wipes.
• If you want to perform a Squeeze & Tease wipe on Key 1 , for example, and Key 1 is
already performing a Fly Key , the Squeeze & Tease wipe is allowed. If the keyer is not
flying a key, the system temporarily borrows a single Squeeze & Tease channel (or two
channels if you request an
Auto Select key).
Note
The Transition Preview and KEY OVER modes are not available
when performing Squeeze & Tease wipes.
S&T
WIPES