Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 146 / 332

5–14 • Background Transitions Synergy Series Operation Guide (v18)
4. Perform a transition with the Fader ,
AUTO TRANS
, or
CUT
. The program transitions
to black. Note that when black is reached, the switcher presets the previous scene (from
step 2), which also is displayed on
Preview .
5. Perform a second transition using the Fader ,
AUTO TRANS
, or
CUT
. The switcher
transitions to the previous scene, at the end of which the
PST BLACK
light turns off.
This completes the procedure to perform a Preset Black transition.
White Flash
White Flash is a single button effect that allows you to set the flash color and timing of a transition.
Once enabled, this effect performs a double transition from
PGM to White Flash to PST using a free
background color generator to produce the White Flash instead of Preset Black. This is achieved by
enabling the White Flash effect, setting the color and timing of the transition and using the
PST
BLACK button in the Program/Preset Transition Group .
Use the following procedure to configure the White Flash effect:
1. Navigate to the Personality Menu 3-4 as follows:
• Press HOME B MORE B Setup B Personality B MORE B MORE .
2. Toggle the White Flash softkey to On to display the White Flash Setup Menu .
White Flash Setup Menu
3. Set the timing of the White Flash as follows:
• Use the Onset Rate knob to set the transition rate (0 to 150 frames) from PGM to
the White Flash.
• Use the Hold Time knob to set the length (in number of frames) of the White Flash
before fading out.
• Use the Fade Rate knob to set the transition rate from the White Flash to PST .
Operating
Tip
After Step 3, a different source other than black can be selected on
PST . This would allow you to dip to, say, COLOR BKGD (white, for
example), for a creative “flash-frame” transition. In addition, BLACK
can be permanently overridden by holding down the PST BLACK
button while selecting the desired source on the PST bus. This
override can be stored to a storage device, such as a floppy disk or
USB key, in the
Personality register.
Note
White Flash differs from Preset Black in that it automatically performs
the transition when
PST BLACK
is pressed.