Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 51 / 332

Synergy Series Operation Guide (v18) Control Panel Introduction • 2–9
Electronically, Key 1 is downstream (visually in front) of the MLE’s background buses,
but upstream (visually in back) of Key 2. The
KEY OVER
button allows you to change
that priority.
The layout of the MLE Key 1 Group is identical on all three switchers — in all MLEs.
On the Synergy 3 and 4 control panels, the location of the group is identical — to the
right of the
Fader . On the Synergy 2 panel, the group is located to the left of the Fader .
17. MLE Key 2 Group
The MLE Key 2 Group allows you to select the key type and associated parameters for
the MLE’s Key 2. Choose between Self Key , Auto Select (Linear Key), Chroma Key ,
and PST Pattern Key . Within the group, you can also select a variety of parameters and
key transitions. When any button is selected in the group, that MLE’s Key Bus is
assigned to Keyer 2. An
ON
LED is provided for tally.
Electronically, Key 2 is downstream (visually in front) of the MLE’s background buses
and downstream of Key 1. The
CHAR GEN
button allows you pick your favorite CG
for immediate keying.
The layout of the MLE Key 2 Group is identical on all three switchers — in all MLEs.
On the Synergy 3 and 4 control panels, the location of the group is identical — to the
right of the
Fader . On the Synergy 2 panel, the group is located to the left of the Fader .
18. Matte Control Group
The Matte Control Group is an assignable module that allows you to adjust matte,
border, and wash generator colors in the selected MLE. By pressing the desired MLE
button in the group (or by pressing any matte-related button within an MLE itself), the
Matte Control Group is assigned to that MLE.
Although functionality is identical, the location and layout of the Matte Control Group
differs all three switchers, due to the differing number of MLE assignment buttons.
19. Effects Control Group
The Effects Control Group is an assignable module that provides an array of controls
that handle all of the switcher’s frequently used analog-type parameters — such as mask
adjustment, border width, and key clip. By pressing the desired MLE (or downstream)
keyer button in the group (or by pressing any button within an MLE that has associated
adjustable parameters), the
Effects Control Group is assigned to that MLE.
The location of the Effects Control Group is virtually identical on all three switchers
(at the upper right side of the control panel). The layout of the group differs slightly due
to the differing number of MLE keyer assignment buttons.
Operating
Tip
You can also change the priority of the two keyers in the Key Setup
Menus by toggling the Key Over softkey between On and Off . Refer
to the section “ Using Keys ” on page 7-20 for more information.