Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 304 / 332

9–24 • Custom Controls Synergy Series Operation Guide (v18)
Edit Custom Control Menu
4. Navigate to the Inserting Menu as follows:
• Use the middle knob to highlight the event that you want to insert an event before.
• Press
Insert Events
to display the Inserting Menu .
.
Edit Custom Control — Inserting Menu
5. Insert a Control Panel Button Press as follows:
• Press the buttons on the control panel that you want to record. All subsequent
keystrokes will be remembered,
in the exact order that you press them . For
example, to program the macro to recall memory register 5 in MLE 1, and then
perform an auto transition, in MLE 1 press
RECALL
,
5
,
AUTO TRANS
. You may
want to insert a pause in this sequence in order to be able to view the memory recall
before the auto transition is performed.
• Press
Finish Inserting
to finish inserting to the selected custom control.
6. Insert a Special Event as follows:
• Press
Insert Special
to display the Insert Special Menu 1-2 .
Important You cannot have a Select Bank and Run Custom Control event in the
same custom control macro.
Operating
Tip
Press Cancel Inserting to return to the previous menu without
recording any of the insertions you made.