Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 278 / 332

8–36 • Memory Functions and More Synergy Series Operation Guide (v18)
Recalling Individual S&T 3D Sequences
Use the following procedure to recall individual S&T 3D sequences from a storage device to the
Synergy Switcher:
1. Navigate to the Disk Recall Individual Items Menu as follows:
• Press HOME B Disk B Recall Individual .
2. Insert a storage device into the Synergy Switcher as follows:
• Insert the floppy disk that contains the S&T 3D sequences into the floppy disk drive
of the Synergy Switcher.
OR
• Insert a USB key that contains the S&T 3D sequences into the USB Port of the
Synergy Switcher. You must wait 5 seconds after inserting the USB key into the
USB port before you can recall sequences from it.
3. Press S&T 3D Sequence in the Disk Recall Individual Items Menu .
4. Select the S&T 3D sequence file as follows:
• Use the From disk knob to select the current location of the file.
• Use the To switcher knob to select the switcher location to store the file.
The Sequence Legend indicates the meaning of the icons that appear by the files
selected.
Disk Recall Individual Items Menu
5. Press the
Recall Item
softkey to recall the register or macro file to selected location on
the Synergy Switcher.
When the file is loaded, this menu closes and the previous menu is displayed, with a
“used” icon beside the switcher location where the sequence is loaded.
Note Only sequences stored with the method outlined in the section “ Saving
Individual Squeeze & Tease 3D Sequences ” on page 8–30, will be
available to recall individually.
Sequences recalled from storage device must have the naming
convention of
STSEQxx.SEQ . While it is recommended that you
rename sequences (on a computer) with more mnemonic titles than this
default style for storage purposes, in order to recall them to the
switcher from a storage device, they must be renamed again to have
the Ross Video convention. Keep a printed record of the file names for
your records.