Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 18 / 332

1–2 • Introduction Synergy Series Operation Guide (v18)
About This Guide
This guide covers the operation of the following Synergy switchers:
• Synergy 2 (2 MLE)
• Synergy 3 (3 MLE)
• Synergy 4 (4 MLE)
The following chapters are included:
Volume I
• The Front Matter of this guide includes information on the warranty and repair policy,
and all regulatory and safety notices and compliance issues.
• Chapter 1 — “ Introduction ” summarizes the guide and describes the components and
features that comprise the Synergy switcher.
• Chapter 2 — “ Control Panel Introduction ” provides an overview of each Synergy
switcher control panel. You will learn the various panel sections and details about basic
functionality.
• Chapter 3 — “ Using the Menu System ” provides an introduction to the menu system
of the Synergy switcher.
• Chapter 4 — “ Switcher Basics ” presents basic operating rules and procedures
regarding crosspoints, buses, knobs, re-entry, and preview mode, plus additional features
such as
Preview Overlay .
• Chapter 5 — “ Background Transitions ” outlines operating procedures for Manual
Transitions, Cuts, Dissolves, Auto Transitions and a variety of other basic background
transition modes.
• Chapter 6 — “ Pattern Control ” provides information and instructions for using the
switcher’s Pattern Control Group .
• Chapter 7 — “ Keying ” provides instructions for using the Synergy switcher’s MLE
Keyers and Downstream Keyers .
• Chapter 8 — “ Memory and Disk Functions ” provides information on using the
Synergy switcher’s Global Memory System , working with storage devices and custom
controls.
• Chapter 9 — “ Custom Controls ” provides instructions for programming custom
controls with various functions such as Go To Menu and Custom Control Holds.
• The Glossary provides a reference list of important switching and video terms used
throughout this guide.
• An Index is also provided for your reference.