Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 244 / 332

8–2 • Memory Functions and More Synergy Series Operation Guide (v18)
Global Memory System Group
The Global Memory System group is used to store and recall switcher memory registers — for all
MLEs on the panel . Within the group, you can also control the switcher’s remote control functions,
control a variety of MLE transition rates, and recall VTR “clips” from memory.
A memory register is a “snapshot” of an MLE (or multiple MLEs). Up to 100 registers can be stored
and recalled. A register can be as simple as the contents of one MLE’s keyer, or as comprehensive as
the contents of the entire switcher, including all MLEs, Aux Buses and DVE settings.
The layout of the group is almost identical on all three switchers, with minor exceptions due to the
differing number of MLEs on each panel. For simplicity in the drawings, sections are numbered in an
identical manner from switcher to switcher.
The following figures illustrate the Global Memory System groups for each Synergy control panel.
Synergy 2 Control Panel
The following figure illustrates the Global Memory System Group for the Synergy 2 control panel:
Synergy 2 Global Memory System Group
Note
On the Synergy 3 and 4 panels, you can also store and recall memory
registers within each MLE itself, using the
MLE Memory Group .
This group of buttons pertains only to that individual MLE — not to
the entire panel.
1) Display
2) Recall Section
3) Keypad 4) Store Section
5) Remote Section
6) Include Section 7) Disk Drive
8) Preview Overlay Group
GLOBAL MEMORY SYSTEM
MLE2
RATE
KEY
RATE
DSK
RATE
MLE1
RATE
MLE
1
MLE
2
7 8 9
ALL
MLE
1
UNDO
EDITOR GPI ATTRIB
INCL
DVE
VTR
CLIP
TIME
CLOCK
STORE RECALL
REMOTE INCLUDE
PREVIEW OVERLAY
RECALL
DVE
KEYS
ONLY
EFF
DISS
4 5 6
1 2 3
BANK 0 ENTER
2 7
5 6
8
1
4 3
MLE
2
FADE
RATE
ALL
EFFECTS MEMORY
VTR
TC
SAFE
TITLE
MASK
PV
HIDE
ONLY
CENTER
SOURCE
ID