Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 286 / 332

9–6 • Custom Controls Synergy Series Operation Guide (v18)
Custom Controls — Recording Menu
4. With the recording in progress, press the buttons on the control panel that you would like
to have played back — in order. All subsequent keystrokes will be remembered, in the
exact order that you press them . The following is a list of examples of custom controls
that can be recorded:
• To program the macro to recall memory register 5 in MLE 1, and then perform an
auto transition, in MLE 1 press
RECALL
,
5
,
AUTO TRANS
. You may want to
insert a pause in this sequence in order to be able to view the memory recall before
the auto transition is performed.
• To have a custom control run another custom control as part of the macro, press the
desired Custom Control button while recording your macro. This will finish the
recording of the custom control.
• To have a custom control select another Custom Control Bank as part of the macro,
double press the desired Custom Control Bank button while recording your macro.
This will finish the recording of the custom control. Remember that when this
custom control is run, it will end on a different bank than where you ran it.
Note Press Cancel Recording to terminate the programming procedure.
The macro will not be recorded.
Important You cannot have a Select Custom Control Bank and Run Custom
Control event in the same custom control macro.
Note Run Custom Control macros can only be added or inserted at the end
of a custom control. When you add a Run Custom Control macro, the
custom control will stop recording and you will not be permitted to
insert another event after it. You will also not be able to add this event
in any position other than the last position in the macro.
Note Custom Control Bank select macros can only be added or inserted at
the end of a custom control. When you add a Bank select macro, the
custom control will stop recording and you will not be permitted to
insert another event after it. You will also not be able to add this event
in any position other than the last position in the macro.