Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 94 / 332

4–16 • Switcher Basics Synergy Series Operation Guide (v18)
Refer to the section “ Installed Options Menus ” on page 2–37 for instructions on verifying the status
of installed options.
Use the following procedure to toggle the functionality of the
DVE Send
button between Internal
and External :
1. Navigate to the Personality Menu 3-4 as follows:
• Press
HOME B MORE B Setup B Personality B MORE B MORE
.
Personality Menu 3-4
2. Press
DVESend Bttn
to toggle between Int and Ext as follows:
•
Int
— Select this option to enable the
DVE Send
button to be used for internal
Squeeze & Tease wipes.
• Ext — Select this option to enable the DVE Send button to be used for external
DVE functions.
This concludes the procedure to toggle the functionality of the DVE Send button.
Audio Transition
The Audio Transition Personality allows you to configure when an audio transition takes place.
Use the following procedure to configure the Audio Transition option:
1. Navigate to the Personality Menu 3-4 as follows:
• Press HOME B MORE B Setup B Personality B MORE B MORE .
Personality Menu 3-4
Important
In previous versions of Synergy software the DVE Send button was
used to control external DVEs.
The default setting in version 14 or higher system software is Internal .
Holding down the WIPE + DVE SEND buttons will also activate
Internal Squeeze & Tease functionality when External is toggled on.