Ross SYNERGY 4000DR-003 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 332

Ross SYNERGY 4000DR-003 Скачать руководство пользователя страница 2

Synergy Series • Operation Guide Volume I

•

Ross Part Number:

4000DR-003

•

Document Issue:

18

•

Release Date: July 2, 2008. Printed in Canada.

•

Software Issue:

18

The information contained in this Operation Guide is subject to change without notice or obligation.

Copyright

© 2008 Ross Video Limited

. All rights reserved.

Contents of this publication may not be reproduced in any form without the written permission of
Ross Video Limited. Reproduction or reverse engineering of copyrighted software is prohibited.

Notice

The material in this manual is furnished for informational use only. It is subject to change without
notice and should not be construed as commitment by Ross Video Limited. Ross Video Limited
assumes no responsibility or liability for errors or inaccuracies that may appear in this manual.

Trademarks

•

is a registered trademark of Ross Video Limited.

•

Ross, ROSS, ROSS

®

, and MLE are registered trademarks of Ross Video Limited.

•

All other product names and any registered and unregistered trademarks mentioned in
this guide are used for identification purposes only and remain the exclusive property of
their respective owners.

«
1
2
3
4
...
»

Содержание SYNERGY 4000DR-003













































































































































































































































































































































Отзывы:

Нет отзывов