Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 144 / 332

5–12 • Background Transitions Synergy Series Operation Guide (v18)
3. Using the keypad (in the Global Memory System group) enter the desired rate in
frames — from
1
to
999
. The rate is displayed on the display’s top line as you type, and
the
ENTER
button lights.
4. To accept the new rate, press ENTER . The display updates as shown below, the ENTER
light turns off, and the new rate is available for use.
Please note:
• To clear the rate and cancel the procedure, press the
MLE RATE
button during the
entry process.
• To enter a different rate before pressing ENTER , simply continue to type until the
desired value is displayed in the register.
This completes the procedure to change the auto transition rates in the Program/Preset Transition
group.
Changing MLE Auto Transition Rates
Use the following procedure to change the auto transition rates in the MLE Transition group:
1. Verify the current MLE transition rate on the second line of the display in the selected
MLE’s Memory group.
MLE Memory System Group
2. Press the
MLE RATE
button. (On the Synergy 2, press
MLE 1 RATE
in the Global
Memory System group.)
3. Enter the desired rate in frames, from
1
to
999
. The rate is displayed on the display’s top
line as you type, and the
ENTER
button lights.
4. To accept the new rate, press ENTER . The display updates as shown below, the ENTER
light turns off, and the new rate is available for use.
New MLE Rate:030
M:015 D:008 F:20
REG:00 Memory0
M:030 D:008 F:20
7 8 9
STORE
MLE
RATE
KEY
RATE
RECALL
KEYS
ONLY
EFF
DISS
4 5 6
1 2 3
BANK 0 ENTER
MLE 1 MEMORY SYSTEM
REG:00
MLE:015 Memory0
KEY:008
New MLE Rate:030
MLE:015 KEY:008
REG:00 Memory0
MLE:030 KEY:008