Remote control commands
R&S
®
SMM100A
703
User Manual 1179.1341.02 ─ 05
Setting parameters:
<IP>
string
*RST:
0
Example:
See
Example "Detecting and assigning a power sensor"
Usage:
Setting only
Manual operation:
See
:SLISt:SCAN:USENsor
<DeviceID>, <Serial>
Scans for R&S NRP power sensors connected over a USB interface.
Parameters:
<Serial>
integer
Range:
0 to 999999
Setting parameters:
<DeviceID>
String or Integer
Range:
0 to 999999
*RST:
0
Example:
See
Example "Detecting and assigning a power sensor"
Usage:
Setting only
Manual operation:
See
:SLISt:CLEar:LAN
Removes all R&S NRP power sensors connected in the LAN from the list.
Example:
See
Example "Detecting and assigning a power sensor"
Usage:
Event
Manual operation:
See
:SLISt:CLEar:USB
Removes all R&S NRP power sensors connected over USB from the list.
Example:
See
Example "Detecting and assigning a power sensor"
Usage:
Event
Manual operation:
See
SENSe, READ, INITiate and SLISt subsystems