Configuring the RF signal
R&S
®
SMM100A
371
User Manual 1179.1341.02 ─ 05
"Ext Triggered" Generates the pulse signal each time an external trigger event
occurs.
Example: Generation of double pulse signal ("Pulse Mode = Dou-
ble") using "Trigger Mode = Ext Triggered"
1
= External trigger signal input with "Trigger Input Polarity = Normal" (the positive
slope is active)
2
= Sync signal
3
= Pulse signal
a
= Trigger signal during double pulse generation is without effect
Δ
t
= Trigger delay between the trigger and the sync signal start; see data sheet
delay = "Double Pulse Delay = 200 ns"; the first pulse starts without a delay
PW
= "Double Pulse Width = 100 ns"
Analog modulations
