Configuring the RF signal
R&S
®
SMM100A
399
User Manual 1179.1341.02 ─ 05
The remote commands required to define the list mode data are described in
Chapter 13.16.11, "SOURce:LIST subsystem"
Access to "Edit User Correction Data":
► "RF" > "RF Level" > "User Correction" > "Edit User Cor. Data"
The editor for user correction data provides a table with RF frequency and power
values and standard navigation functions.
The remote commands required to define the user correction data are described in
Chapter 13.16.5, "SOURce:CORRection subsystem"
All columns in a row must contain values. Cells with missing values are therefore filled
automatically, using the value of the previous row.
If you use
global dwell time in list mode
, consider also that the instrument uses the
for all list steps and not the values from the list.
Improving level performance
