Rohde & Schwarz SMM100A, Руководство пользователя

Страница: 901 / 1088

Remote control commands
R&S
®
SMM100A
901 User Manual 1179.1341.02 ─ 05
Manual operation: See "Mode" on page 480
[:SOURce<hw>]:IQ:OUTPut:LEVel <Level>
Sets the off-load voltage Vp of the analog I/Q signal output.
The value range is adjusted so that the maximum overall output voltage does not
exceed 4V, see
"Maximum overall output voltage" on page 477.
Parameters:
<Level> float
Range:
0.02V to 2V
Increment: 1E-4
*RST:
1
Default unit: V
Example: See Example "Enabling and configuring the analog output"
on page 898.
Manual operation: See "I/Q Level Vp EMF" on page 480
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:BIAS:COUPling[:STATe] <State>
Couples the bias setting of the I and Q signal components.
Parameters:
<State> 1 | ON | 0 | OFF
*RST:
0
Example: See Example "Enabling and configuring the analog output"
on page 898.
Manual operation: See "Couple I/Q Bias" on page 480
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:BIAS:I <I>
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:BIAS:Q <Q>
Specifies the amplifier bias V
bias
of the respective I or Q component.
The value range is adjusted so that the maximum overall output voltage does not
exceed 4V, see
"Maximum overall output voltage" on page 477.
Parameters:
<Q> float
Range:
-0.2V to 2.5V
Increment: 1E-4
*RST:
0
Default unit: V
Example: See Example "Enabling and configuring the analog output"
on page 898.
Manual operation: See "Bias (EMF)" on page 480
SOURce subsystem