Troubleshooting and notifications
R&S
®
SMM100A
1001
User Manual 1179.1341.02 ─ 05
Error
code
Error
Description
Remedy
183
Adjustment data invalid
Adjustment data is invalid and must be restored.
Generate the adjustment data and load
it into the device
200
Cannot access hardware
The data transmission to a module was unsuc-
cessful.
The module is not installed, not properly
installed or missing.
201
Hardware revision out of
date
A later version of certain parts of the instrument is
necessary to execute the function selected.
The driver does not support the installed
version of a module.
202
Cannot access the
EEPROM
An error occurs when writing or reading a
EEPROM.
The EEPROM is possibly defect.
Replace it.
203
Invalid EEPROM data
Reading a EEPROM is possible, however the
data are inconsistent.
204
Driver initialization failed
Initialization of a driver fails when booting the
instrument firmware.
The driver is not compatible with the
hardware or software configuration of
the instrument.
241
No current list
There is no list selected. To execute the required
operation, a list has to be selected in the related
dialog. If no list is available, a new list must be
created.
242
Unknown list type speci-
fied
The list type selected is not valid for the required
operation.
For instance, the file extension for waveform list
files is
*.wv
. It is not possible to enter another file
extension when selecting a list.
Check the selected list type.
261
Waveform protected
The selected waveform file cannot be transferred
to a controller. The waveform is produced with
simulation software R&S WinIQSIM2 and is pro-
tected.
460
Cannot open the file
The selected file cannot be opened.
Check the path and file name.
461
Cannot write file
The file cannot be written.
Check if the file is read-only.
462
Cannot read file
The file cannot be read.
Check if the file contents are compatible
with the file type.
463
Filename missing
The required operation cannot be executed
because the file name is not specified.
Enter file name when creating list.
464
Invalid filename extension The file extension is not valid for the required
operation.
Check the file extension.
For instance, the file extension for wave-
form list files is
*.wv
. It is not possible
to enter another file extension when
storing a list.
465
File contains invalid data
The selected file contains data that is not valid for
the file type.
The file extension determines the data that is
valid for this file type. If the file extension is
changed, the lists are no longer recognized and
the data is therefore invalid.
Example: the extension of a waveform file (=
*.wv
) was changed to
*.txt
Check the file extension.
Device-specific notifications
