File and data management
R&S
®
SMM100A
499
User Manual 1179.1341.02 ─ 05
Whenever a data list file is enabled as a data source, the instrument provides direct
access to the standard "File Select" function. This function enables you to select, cre-
ate and edit the data list files.
10.5.1
File select settings
The "File Select" dialog opens automatically each time you select a data list file as data
source or you select a control list.
To access a loadable data list file
1. Select the "Data List Name" in the individual dialog.
For "Baseband > 3GPP FDD > Base Stations > BS1 > Channel Table > P-CCPCH
> Data = Data List", for example, select "DList Patt = None".
A file select dialog for loading, creating and modifying a file opens.
Tip:
The name of the dialog is context-sensitive and differs depending on the par-
ticular function this dialog is from. However, the provided functions are similar.
2. To load an existing file:
Navigate through the file system.
Select the file and confirm with "Select".
3. To create a file, for example if there is no data list file specified:
Navigate through the file system.
Select "New" and specify the filename.
A new empty file is created and saved in the selected folder.
4. To edit an existing or newly created file:
Navigate through the file system.
Select the file and select "Edit".
The standard "Data List Editor" dialog opens
Accessing files with user data
