manualshive.com logo in svg

Oce VarioLink 6022, Руководство пользователя

Поделиться
Скачать
Oce VarioLink 6022 Скачать руководство пользователя страница 53

VarioLink 6022/7522

1-32

Before Making Copies

1

!

Detail 

The length of time until the automatic panel reset operation is performed and whether or not it is 
performed can be set from Utility mode. For details, refer to 

"System Settings" on page 11-23

.

Whether or not the automatic panel reset operation is performed when there is a change of user can be 
set from the Utility mode. For details, refer to 

"System Settings" on page 11-23

.

1.3.5

Automatically canceling the mode screen (System Auto Reset)

If no operation is performed for a specified length of time, the screen is automatically changed to that for the 
mode given priority.

This is the System Auto Reset operation.

As the factory default, the Copy mode screen is displayed after 1 minute.

!

Detail 

The mode screen that is displayed when the System Auto Reset operation is performed can be changed 
from the Utility mode. For details, refer to 

"System Settings" on page 11-23

.

1.3.6

Automatically conserving energy (Low Power mode)

If no operation is performed for a specified length of time, the touch panel goes off and the machine 
automatically enters a mode where it conserves energy.

This is the Low Power mode.

The machine can receive jobs even while it is in Low Power mode.

As the factory default, the machine enters Low Power mode after 15 minutes.

To recover from Low Power mode

1

Press the [Power Save] key.

2

The machine can receive jobs while it is warming up.

–

The touch panel comes on again and, after the machine has finished warming up, it is ready to begin 
printing.

2

Note 

As the factory default, pressing the [Power Save] key causes the machine to enter Low Power mode. 
Settings in the Administrator Settings mode can be changed to put the machine in Sleep mode instead. 
For details, refer to 

"System Settings" on page 11-23

.

The Low Power mode can also be canceled by pressing any key in the control panel or by touching the 
touch panel.

!

Detail 

The length of time until the machine enters Low Power mode can be changed.
For details, refer to 

"System Settings" on page 11-15

 and 

page 11-23

.

Содержание VarioLink 6022





























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды