manualshive.com logo in svg

Oce VarioLink 6022, Руководство пользователя

Поделиться
Скачать
Oce VarioLink 6022 Скачать руководство пользователя страница 233

VarioLink 6022/7522

4-45

Troubleshooting

4

Finisher

The finisher cannot be 
used.

Is no power supplied to the con-
nector?

Check that the cord is correctly in-
serted into the connector.

The pages cannot be sta-
pled.

Have the staples run out?

Replace the staple cartridge. (See 

p. 8-6

.)

The staple is incorrectly 
positioned by 90 degrees.

Is the staple position correctly 
specified?

Specify the desired position for 
stapling. (See 

p. 2-60

.)

The pages that were fed 
out were not uniformly 
loaded and the punched 
holes or staples are incor-
rectly positioned.

Is the paper curled?

Remove the paper from the paper 
tray, turn it over, and then load it 
again.

Is there a gap between the lateral 
guides in the paper tray and the 
sides of the paper?

Slide the lateral guides in the paper 
tray against the sides of the paper 
so that there is no gap.

Even though a Punch set-
ting was selected, holes 
are not punched. (when 
the punch unit is installed 
on the finisher)

Did the message "Empty the hole-
punch scrap box." appear?

Empty the hole-punch scrap box. 
(See 

p. 8-18

)

Symptom

Possible cause

Remedy

Trouble

Possible cause

Remedy

Authenti-
cation 
Unit (Bio-
metric 
Type)

The USB cable is connect-
ed between the authenti-
cation unit and the 
machine, but the status in-
dicator is not lit in green.

The USB port of the machine may 
be malfunctioning.

Turn the machine off with the main 
power switch and temporarily dis-
connect the USB cable from the 
authentication unit or the machine 
before connecting it again and 
waiting 10 seconds before turning 
on the machine with the main pow-
er switch.

The USB cable is connect-
ed between the authenti-
cation unit and the 
computer, but the status 
indicator is not lit in green.

The USB port of the computer may 
be malfunctioning.

Restart the computer.

Is the authentication unit correctly 
installed?

Refer to "Registering from Data 
Administrator", and check if the 
driver is correctly installed on the 
computer. (

p. 12-6

)

A tone does not sound 
from the machine when 
scanning begins and when 
authentication is complet-
ed.

Has the tone setting on the ma-
chine been set to "OFF"?

Refer to "Registering users", and 
set the tone setting to "ON". 
(

p. 12-11

)

The message "Failed to 
register". appears on a 
machine where registra-
tion failed.

With the authentication unit, the 
scanning time is limited for each 
scan. This message appears if 
scanning is not possible within the 
limited period of time.
For details on the scanning time, 
consult with the technical repre-
sentative.

Refer to the Quick Guide Authenti-
cation Unit (Biometric Type AU-
101) and check how to position the 
finger for authentication and scan-
ning in order to complete scanning 
within the limited period of time. 
Correctly position the finger to be 
scanned on the scanner, and do 
not move the finger until the scan-
ning results are received. If the 
area of the finger to be scanned is 
dirty or chapped, a correct image 
cannot be created and scanning 
may not be completed. Wash your 
hands and try scanning again, or 
try to correct chapped fingers. If 
the area of the finger to be scanned 
is too wide or too thin (outside of 
the finger width range of 10 mm to 
25 mm), a correct image cannot be 
created and scanning may not be 
completed. Try widening your fin-
ger or inserting it deeper or less 
deep into the scanner.

Logon failed. The message 
"Failed to Authenticate." 
appears on the machine.

The message "Failed to 
read data. Place your fin-
ger once again and click 
the [Start reading] button." 
appears on a computer 
where registration failed.

With the authentication unit, the 
scanning time is limited to five sec-
onds for each scan. This message 
appears if scanning is not possible 
within the five-second time period.

Содержание VarioLink 6022





























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды