Oce VarioLink 6022 Скачать руководство пользователя страница 288

Страница: 288 / 540

VarioLink 6022/7522

7-11

Application functions

Select the paper tray loaded with the paper for the insertion sheets, and then touch [OK].

–

If [Blank] is selected in step 6, the Post Inserter can be selected for paper tray.

Touch [OK], and then touch [OK] in the next screen that appears.

Touch [Post Inserter].

–

Touch a button for a page number, and then use the keypad to type in the number of the page where
the paper is to be inserted.

–

There are two Post Inserter screens. Touch [

↑

] or [

↓

] to display a different screen.

–

To arrange the page numbers in order, starting with the lowest number, touch [Sort].

–

To remove a page number that has been specified, touch the button for the page to be removed,
and then press the [C] (clear) key.

–

If the same page number is entered multiple times, copying is not possible. Delete repeated page
numbers.

–

If the entered page number is greater than the number of pages in the original, paper is not inserted.

Select the paper tray loaded with the paper for the insertion sheets, and then touch [OK].

Touch [OK], and then touch [OK] in the next screen that appears.

Specify any other desired copy settings.

Using the keypad, type in the desired number of copies.

Press the [Start] key.

Содержание VarioLink 6022





























































































































































































































































































































































































































































































































































Результаты поиска

Содержание VarioLink 6022

Отзывы:

Бренды по названию

Популярные бренды

Oce VarioLink 6022, Руководство пользователя

Результаты поиска

Содержание VarioLink 6022

Отзывы:

Бренды по названию

Популярные бренды