Oce VarioLink 6022 Скачать руководство пользователя страница 283

Страница: 283 / 540

VarioLink 6022/7522

7-6

Application functions

–

To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.

The Sheet/Cover/Chapter Insert screen appears.

Touch [Cover Sheet].

The Cover Sheet screen appears.

Select the desired cover page settings.

–

To cancel the setting and select the default, press the [Reset] key.

–

To cancel the "Cover Sheet" function, touch [No].

–

The default setting for the paper tray loaded with cover pages can be specified from the Utility
mode. For details, refer to

"Copier Settings" on page 11-18

–

If the optional post inserter has been installed, [Outer Cover Sheet] appears.

–

If paper for cover pages has been loaded in the main unit, continue with step 6.

–

If paper for cover pages has been loaded in a tray of the post inserter, continue with step 9.

If desired, touch [Paper] under "Front Cover" or "Back Cover".

Содержание VarioLink 6022





























































































































































































































































































































































































































































































































































Результаты поиска

Содержание VarioLink 6022

Отзывы:

Бренды по названию

Популярные бренды

Oce VarioLink 6022, Руководство пользователя

Результаты поиска

Содержание VarioLink 6022

Отзывы:

Бренды по названию

Популярные бренды