manualshive.com logo in svg

Oce VarioLink 6022, Руководство пользователя

Поделиться
Скачать
Oce VarioLink 6022 Скачать руководство пользователя страница 301

VarioLink 6022/7522

7-24

Application functions

7

7.8

Producing separate copies of each page in a page spread ("Book 
Copy" function)

An open book or catalog can be copied with the left and right pages on separate sheets of paper.

The following copy methods are available, and there are settings for adding front and back covers.

0

Place the original on the original glass. Be sure to keep the ADF open throughout the scanning job.

1

Place the pages on the original glass, starting with the first page.

–

For details on positioning the original, refer to 

"Feeding the original" on page 2-6

.

–

If "Front and Back Cover" was selected, the front cover is scanned before the back cover, and then 
all page spreads are scanned in order.

?

How are the front and back covers copied?

%

Scan the front cover, then the back cover, and then scan the remainder of the original.

2

Load the paper to be used into the desired paper tray.

Setting

Description

Book Spread

Both pages of the page spread are printed on the same page.

Separation

Separate copies of each page in the page spread are printed in the original page order. 
The original is scanned to fit the size of paper that will be used.

Front Cover

The front cover and separate copies of each page in the page spreads are printed in the 
original page order.

Front and Back Cover

The front cover, separate copies of each page in the page spreads and the back cover 
are printed in the original page order.

SURVEYOR’S

REPORT

SURVEYOR’S

REPORT

Содержание VarioLink 6022





























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды