manualshive.com logo in svg

Oce VarioLink 6022, Руководство пользователя

Поделиться
Скачать
Oce VarioLink 6022 Скачать руководство пользователя страница 50

VarioLink 6022/7522

1-29

Before Making Copies

1

1.3

Turning on the main power and the auxiliary power

This machine has two power controls: the main power switch and the [Power] (auxiliary power) key.

1.3.1

Turning on the machine

The main power switch turns on/off all functions of the machine. Normally, the main power switch is turned 
on.

The [Power] (auxiliary power) key turns on/off machine operations, for example, for copying, printing or 
scanning. When the [Power] (auxiliary power) key is turned off, the machine enters a state where it conserves 
energy.

1

Open the front door, and then set the main power switch to "

n

".

2

Close the front door.

3

Press the [Power] (auxiliary power) key.

Check that the touch panel is turned on.

!

Detail 

When the [Power] (auxiliary power) key is turned on, the indicator on the [Start] key lights up in orange, 
and a screen indicating that the machine is starting up appears.
After a few seconds, the message "Warming up. Ready to scan." appears on the touch panel, and the 
indicator on the [Start] key lights up in blue, indicating that a job can now be queued.

The default settings are the settings that are selected immediately after the machine is turned on (the 
power switch is set to "

n

") and before any setting is specified from the control panel or touch panel, and 

those that are selected when the [Reset] key is pressed to cancel all settings specified from the control 
panel or touch panel. The default settings can be changed. For more details, refer to 

"Custom Display 

Settings" on page 11-17

.

The factory default settings are the settings that were selected when this machine was sent from the 
factory.

Содержание VarioLink 6022





























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды