NAVIS NavDP 4000 Series Скачать руководство пользователя страница 209

Страница: 209 / 348

System Functions

(a) View: TRUE

(b) View: REL

Figure 10.58: Capability Plot View

NOTE!

Switching to Drift analysis is available in DP control mode only.

— Capability Plot printout (see Section 10.8, page 217).

Zoom In, Zoom Out

— Capability Plot view scale.

Press “+” and “–” softkeys to change the scale of the Capability Plot view (Zoom In/Zoom Out).

Capability Plot Legend

White-colored vessel contour

is displayed in the centre of the plot. It is directed to the present heading.

Wind speed dial

is displayed as

white

circles for 10, 20, 30, 40 and 50 m/s (the units are set and may be changed

in “Units” Page of “Param” window — see Section 5.9, page 85). The circle for 50 m/s is overlapped with the
directional dial.

Present wind speed

is displayed as

yellow

circle. It allows the operator to evaluate the vessel’s capability to maintain

position at the present wind speed.

Green marker

indicates current direction.

Yellow marker

indicates wind direction.

Cyan marker

indicates wave direction. It matches the wind direction in Auto mode.

Electronic Bearing Line (EBL)

EBL (Electronic Bearing Line)

is displayed as

lilac

line. It is directed to the North by default.

EBL is intended for selecting direction for which the limiting wind speed at which the vessel is able to maintain its

position and heading to be determined.

– Assume, the operator needs to know the limits for the vessel heading 0

∘

. For this purpose EBL value should be set

as 0

∘

. The limiting wind speed is about 14.1 m/s (see Figure 10.59).

– For the heading 30

∘

the limiting wind speed is about 18.0 m/s.

The calculated limiting wind speed values both for the present heading and for the EBL direction are displayed under the
Capability Plot.

Press

Change

softkey near the

EBL

text to set a new EBL direction.

In the opened dialog box enter a new value for the EBL direction and press

(see Figure 10.60).

The following areas depending on both wind and wave disturbances and current speed are presented in the Plot:

Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”

208

Содержание NavDP 4000 Series





























































































































































































































































































































































Результаты поиска

Содержание NavDP 4000 Series

Отзывы:

Похожие инструкции для NavDP 4000 Series

Бренды по названию

Популярные бренды

NAVIS NavDP 4000 Series, Руководство по эксплуатации

Результаты поиска

Содержание NavDP 4000 Series

Отзывы:

Похожие инструкции для NavDP 4000 Series

Бренды по названию

Популярные бренды