NAVIS NavDP 4000 Series, Руководство по эксплуатации

Страница: 26 / 348

NAVIS NavDP 4000. Operation Manual
2.4 Control Panel MCP4000 with LCD Screen
The following components of the Control Panel are mounted on an aluminum base plate:
– Rotary Knob/button;
– 6” color LCD;
– PCB with integrated indicators and electronic components.
The arrangement of controls, push buttons and indicators on the control panel is shown in Figure 2.7.
The special protective transparent film with button and indicator inscriptions printed on is glued on the aluminum base
plate. All panel controls and indicators are highlighted.
The Alarm Speaker is used for voice announcement of all messages appearing in the system Alarm Window. Alarm
Speaker is embedded into the system console and connected with the Control Panel by separate cable.
For LCD GUI details see Section 5.12, page 90.
Figure 2.7: Control Panel Controls, Buttons and Indicators (MCP and PCP)
Disconnected Panel
In case the panel has no signal from the system, the status is “Disconnected”. In this state all push buttons have white
backlights, but the color of the indicators corresponds their status (see the sections below).
In this state to call the Configuration menu (see 5.12.6, page 99) press at one time on the DIM+/DIM- buttons.
NOTE!
In case there is no Lamp Test item in the list, the lamp test is performed
by the long (at least 5 sec) pressing on the DIM+/DIM- buttons.
Monitorless Configuration
In case the system configuration does not include a touchscreen display the operations are performed via the control
panel. Description of the functionality see below.
All popup windows appear on the panel display.
2.4.1 POWER
indicates if the system is powered. In case the system is powered, the button is green.
25
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”