Operator Interface
green
— PLC is connected;
red
— PLC is not connected.
The system time is located at the top right corner.
5.12.4
Left Panel
The left panel contains three consoles. The information displayed in a console depends on the current mode and
settings.
5.12.4.1
Heading Console
The top left corner contains the vessel heading information (see Figure 5.50).
Depending on operating mode the following data are displayed:
– DP mode, manual heading and manual position:
– Current heading
– Current angular velocity
– DP mode, auto heading and/or auto position, or AP mode:
– Current heading
– Heading set
– Current angular velocity
– An offset angle and direction
Figure 5.50: Heading Console
5.12.4.2
Position Console
The SOG and COG values a displayed in the console. Additionaly operating in DP mode:
– In the AutoPos mode the console contains the graphic view (in relative coordinates) of the vessel position relative
to the set value (see Figure 5.52):
– the real offset;
– The allowable circle for the the set point with the Position Limit as the radius value and preset point as the
center;
– The vessel sign displayed about the set position and with drift direction;
– The North sign.
– In case of other modes:
– Coordinates as a text (see Figure 5.51).
In the Hold Area mode the radius value is equal the Holding Area Radius and the Warning Radius is displayed as
dashed circle (see Figure 5.53)
Operating in the AP mode the console contains the following data:
– SOG
– COG
– Heading sensor
– POsition sensor
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
96
Содержание NavDP 4000 Series
Страница 88: ...NAVIS NavDP 4000 Operation Manual Figure 5 35 Dark Theme 87 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 222: ...NAVIS NavDP 4000 Operation Manual Figure 10 74 Drift Plot Window 221 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
Страница 324: ...NAVIS NavDP 4000 Operation Manual Figure H 4 Remote DLS Mode 323 Doc 000 JDP 10000 OME rev 3 3 13 2102 17A Advanced...
