NAVIS NavDP 4000 Series, Руководство по эксплуатации

Страница: 78 / 348

NAVIS NavDP 4000. Operation Manual
Use the softkey to change the direction:
N
— north;
S — south;
W — west;
E — east;
FWD — fore;
AFT — aft;
STBD — starboard;
PORT
— port.
Use arrow softkeys to move the blue cursor in the text box.
NOTE! Relative offsets direction are color-marked. An afterbody and port with
red, bows and starboard — with green.
(a) True offset (b) Relative offset (c) Polar offset
Figure 5.19: Input Position Offset dialog
In case operator entered the Offset value and then selected another coordinate system, the NAVIS NavDP 4000 system
automatically converts data in the new coordinate system. The current offset value can overflow the reserved digits. In
this case the entry field will be red and the # symbols will be displayed (see figure 5.20).
Select the first coordinate system and enter a new offset value for the correct data displaying.
See Section 8.1, page 139 for details about entering position in different coordinate systems.
The position offset values can be set with control panels (CP4000 family). See Sections 2.4.8, page 27 and 2.5.11,
page 36 for details.
5.5.1 Position new setpoint indication on Map
When Map window is visible, new position setpoint is shown on map view – see figure5.21.
WARNING! A new position setpoint is shown on Map as brown vessel contour
with new heading and position.
77
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”